A Review of Current Clinical Applications of Three-Dimensional Printing in Spine Surgery
Woojin Cho, Alan Varkey Job, Jing Chen, Jung Hwan Baek
Asian Spine J. 2018;12(1):171-177.   Published online 2018 Feb 7     DOI: https://doi.org/10.4184/asj.2018.12.1.171
Citations to this article as recorded by Crossref logo
Three-Dimensional Printing of a Spinal Interbody: Design Principles, Biomaterials, and Translational Considerations
Sahil Garg, Patrick Young, Christopher Franquemont, Rachel Conley, Sanjitpal Gill
Journal of Functional Biomaterials.2026; 17(3): 143.     CrossRef
Association of convex-side spinal canal elongation with distraction spinal cord injury during severe adolescent scoliosis correction: a retrospective cohort study
Chaofan Han, Honghao Yang, Zihao Ding, Guoan Li, Yong Hai
Journal of Orthopaedic Surgery and Research.2026;[Epub]     CrossRef
3D-printed patient-specific guides improve screw accuracy in upper cervical spine surgery: a comparative study
Guoqi Niu, Yalong Guo, Gong Zhou, Yang Gao, Weili Jiang, Hui Chen, Hu Nie, Tao Liu, Zheng Sun, Jiawei Cheng, Yi Yang, Jianzhong Bai
Frontiers in Neurology.2026;[Epub]     CrossRef
A Systematic Review of 3D-Printing in Spine Surgery: Applications, Accuracy, and Outcomes
Majdi Hashem
Healthcare.2026; 14(19): 3344.     CrossRef
Use of Carbon Fiber Implants to Improve the Safety and Efficacy of Radiation Therapy for Spine Tumor Patients
Fred C. Lam, Santosh Guru, Deyaldeen AbuReesh, Yusuke S. Hori, Cynthia Chuang, Lianli Liu, Lei Wang, Xuejun Gu, Gregory A. Szalkowski, Ziyi Wang, Christopher Wohlers, Armine Tayag, Sara C. Emrich, Louisa Ustrzynski, Corinna C. Zygourakis, Atman Desai, Mel
Brain Sciences.2025; 15(2): 199.     CrossRef
“Antenna Effect”‐Enhanced AuNPs@rGO Photothermal Coating Promotes 3D Printing of Osteogenic Active Scaffolds to Repair Bone Defects after Malignant Tumor Surgery
Xinyu Xu, Hao Wang, Xiaohan Mei, Dapeng Zeng, Zehao Yu, Shibo Liu, Ruiyan Li, Yanguo Qin
Advanced Science.2025;[Epub]     CrossRef
The use of 3D printing for preoperative planning and individualization of treatment in traumatology and orthopedics: conceptual evolution and development prospects
Z. Z. Yunusova, A. S. Saidov, M. A. Saidova, A. R. Atayev
Yakut Medical Journal.2025; (1): 94.     CrossRef
Enhancing orthopedic education in China with the BOPPPS teaching model and 3D printing technology: a comparative study
Khan Akhtar Ali, Jiaxin Zhang, Zean Xia, Yufeng Zuo, Ruying Lai, Hui Huang, LingXiao He, Weihua Hu
3D Printing in Medicine.2025;[Epub]     CrossRef
Emerging Evidence for Three-Dimensional (3D)-Printed Guide Templates in Cervical Spine Trauma Surgery: A Scoping Review
Vikash Raj, Aakash Jain, Vishal Kumar, Aman Verma, Pankaj Kandwal, Richa Richa, Sitanshu Barik
Cureus.2025;[Epub]     CrossRef
Revisión sistemática de las aplicaciones y límites de la impresión 3D en la cirugía de raquis
José Vicente Martínez Quiñones, Javier Orduna Martínez, David Pinilla Arias, Manuel Bernal Lecina, Fabián Consolini Rossi, Ricardo Arregui Calvo
Neurocirugía.2024; 35(1): 30.     CrossRef
Systematic review of the utility and limits of 3D printing in spine surgery
José Vicente Martínez Quiñones, Javier Orduna Martínez, David Pinilla Arias, Manuel Bernal Lecina, Fabián Consolini Rossi, Ricardo Arregui Calvo
Neurocirugía (English Edition).2024; 35(1): 30.     CrossRef
Indications for Nonbiological Reconstruction of Posttraumatic Bone Defects About the Knee
Kevin D. Tetsworth, Zhenya H. Welyczko, Stephen M. Quinnan
Journal of Orthopaedic Trauma.2024; 38(4S): S23.     CrossRef
Our experience in 3D-modelling in pilon (distal tibial plafond) fractures
Mikhail V. Parshikov, Arsenty B. Koshkin, Nikolay V. Yarigin, Sergey V. Novikov, Andrey A. Prokhorov, Mikhail V. Govorov, Rasul N. Aliev, Vladimir V. Guriev
N.N. Priorov Journal of Traumatology and Orthopedics.2024; 31(1): 31.     CrossRef
Preoperative Planning Using 3D Printing as a Way to Improve the Outcomes of Surgical Treatment for Pilon Fractures
A. B. Koshkin, M. V. Parshikov, S. V. Novikov, A. A. Prokhorov, A. M. Fai
Russian Sklifosovsky Journal "Emergency Medical Care".2024; 13(2): 247.     CrossRef
Patient-specific mechanical analysis of pedicle screw insertion in simulated osteoporotic spinal bone models derived from medical images
Norihiro Nishida, Hidenori Suzuki, Hanvey Tetsu, Yuki Morishita, Yogesh Kumaran, Fei Jiang, Masahiro Funaba, Kazuhiro Fujimoto, Yusuke Ichihara, Takashi Sakai, Junji Ohgi
Asian Spine Journal.2024; 18(5): 621.     CrossRef
The Possibilities of Personalized 3D Printed Implants—A Case Series Study
Selim Safali, Till Berk, Biser Makelov, Mehmet Ali Acar, Boyko Gueorguiev, Hans-Christoph Pape
Medicina.2023; 59(2): 249.     CrossRef
Comparative Analysis of Radiologic Outcomes Between Polyetheretherketone and Three-Dimensional-Printed Titanium Cages After Transforaminal Lumbar Interbody Fusion
Tamima Sultana, Mosharraf Hossain, Je Hoon Jeong, Soobin Im
World Neurosurgery.2023; 179: e241.     CrossRef
Fuzzy Controller Implemented for Movement of a Tendon-Driven 3D Robotic Lumbar Spine Mechanism
Thuanne Paixão, Ana Beatriz Alvarez, Ruben Florez, Facundo Palomino-Quispe
Sensors.2023; 23(24): 9633.     CrossRef
Current trends and future scope in 3D printing for surgical management of spine pathologies
Naresh Kumar, Sridharan Alathur Ramakrishnan, Keith Gerard Lopez, Brian Zhaojie Chin, Devyapriya S, Laranya Kumar, Sangeetha Baskar, Balamurugan A. Vellayappan, Jerry Ying Hsi Fuh, Senthil Kumar Anantharajan
Bioprinting.2022; 26: e00197.     CrossRef
Uso de planificación preoperatoria e impresión 3D en ortopedia y traumatología: ingresando en una nueva era
D Moya, B Gobbato, S Valente, R Roca
Acta Ortopédica Mexicana.2022; 36(1): 39.     CrossRef
Current Clinical Applications of Three-dimensional Printing in Spine Surgery and Education
Yoshitaka Nagashima, Yusuke Nishimura, Sho Akahori, Kazuhito Takeuchi, Kenji Uda, Hiroshi Ito, Ryuta Saito
Spinal Surgery.2022; 36(3): 296.     CrossRef
Clinical and radiological outcomes of Chinese customized three-dimensionally printed total temporomandibular joint prostheses: A prospective case series study
Xuzhuo Chen, Yi Mao, Jisi Zheng, Chi Yang, Ke Chen, Shanyong Zhang
Journal of Plastic, Reconstructive & Aesthetic Surgery.2021; 74(7): 1582.     CrossRef
Is the Measurement of Pedicle Axial Axes on Computed Tomography in Adolescent Idiopathic Scoliosis Also a Guide for Safer Screwing?
Ahmet Onur Akpolat, Bekir Eray Kilinc, Mehmet Fatih Aksay, Onur Gultekin, Semih Ak, Erkan Akgun, Mehmet Bulent Balioglu
World Neurosurgery.2021; 147: e559.     CrossRef
Customised hybrid CT-MRI 3D-printed model for grade V spondylolisthesis in an adolescent
Jayanthi Parthasarathy, Eric A Sribnick, Mai-Lan Ho, Allan Beebe
BMJ Case Reports.2021; 14(3): e239192.     CrossRef
Accuracy of CT for measuring femoral neck anteversion in children with developmental dislocation of the hip verified using 3D printing technology
Zhencun Cai, Chengzhe Piao, Tianyu Zhang, Lianyong Li, Liangbi Xiang
Journal of Orthopaedic Surgery and Research.2021;[Epub]     CrossRef
Three-dimensional Printing in Orthopaedic Surgery: Current Applications and Future Developments
Colleen M. Wixted, Jonathan R. Peterson, Rishin J. Kadakia, Samuel B. Adams
JAAOS: Global Research and Reviews.2021; 5(4): e20.00230.     CrossRef
Development and Validation of a Mixed Reality Configuration of a Simulator for a Minimally Invasive Spine Surgery Using the Workspace of a Haptic Device and Simulator Users
Sneha Patel, Sami Alkadri, Mark Driscoll, Fabiano Bini
BioMed Research International.2021;[Epub]     CrossRef
Novel Intervertebral Technologies
Mohamad Bydon, Anshit Goyal, Yagiz U. Yolcu
Neurosurgery Clinics of North America.2020; 31(1): 49.     CrossRef
Three-dimensional printing in spine surgery: a review of current applications
Yixuan Tong, Daniel James Kaplan, Jeffrey M. Spivak, John A. Bendo
The Spine Journal.2020; 20(6): 833.     CrossRef
Intraoral Scanner, Three-Dimensional Imaging, and Three-Dimensional Printing in the Dental Office
Levon Nikoyan, Rinil Patel
Dental Clinics of North America.2020; 64(2): 365.     CrossRef
Three-Dimensional Printing: A Catalyst for a Changing Orthopaedic Landscape
Jonathan Minto, Xuan Zhou, Jenna Osborn, Lijie Grace Zhang, Kausik Sarkar, Raj D. Rao
JBJS Reviews.2020; 8(2): e0076.     CrossRef
Preparation of Artificial Bone by 3D Printing Technology and Its Application in Clinical Practice
启洋 冯
Hans Journal of Biomedicine.2020; 10(01): 1.     CrossRef
Analysis of the 3D prototyping in the surgical correction of congenital kyphoscoliosis
A. A. Snetkov, D. S. Gorbatyuk, A. A. Panteleyev, N. A. Eskin, S. V. Kolesov
Hirurgiâ pozvonočnika (Spine Surgery).2020; 17(1): 42.     CrossRef
3D printing and spine surgery
Alpaslan Senkoylu, Ismail Daldal, Mehmet Cetinkaya
Journal of Orthopaedic Surgery.2020;[Epub]     CrossRef
Recent Developments of Biomaterials for Additive Manufacturing of Bone Scaffolds
You Chen, Weilin Li, Chao Zhang, Zhaoying Wu, Jie Liu
Advanced Healthcare Materials.2020;[Epub]     CrossRef
Three-Dimensional Printing Guide Template Assisted Percutaneous Vertebroplasty (PVP)
PeiLun Hu, JiSheng Lin, JunChuan Xu, Hai Meng, Nan Su, Yong Yang, Qi Fei
Journal of Visualized Experiments.2019;[Epub]     CrossRef
Three Dimensional Printed Bone Implants in the Clinic
Nazzar Tellisi, Nureddin A. Ashammakhi, Fabrizio Billi, Outi Kaarela
Journal of Craniofacial Surgery.2018; 29(8): 2363.     CrossRef